Something weird is happening with the Misc. Category in CAST. It happens in both CAS and Build/Buy modes, on all types of lots, with all types of sims. The patterns don't load. At all.

If I go into CAST and try to edit a pattern that was in the Misc. category to begin with (as seen in the photos with the shoes), I can change the color, I can go to a different pattern category, but I can't select a different Misc. pattern.

From the Misc. screen, I also can't quit out or OK out of the CAST screen. The option isn't there.

If I click to only view CC, I can see some, but not all of the misc. patterns. I believe some wainscoting patterns are missing that were there before.

I didn't see anything about this in the FAQ. Halp much appreciated.

Hardware Overview:

Model Name: MacBook
Model Identifier: MacBook5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB52.0088.B06
SMC Version (system): 1.38f5
Serial Number (system): System Serial#
Hardware UUID: 973B44C5-541B-5455-993A-533E8E1BA657
Sudden Motion Sensor:
State: Enabled


Graphics:
NVIDIA GeForce 9400M:

Chipset Model: NVIDIA GeForce 9400M
Type: Display
Bus: PCI
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0866
Revision ID: 0x00b1
ROM Revision: 3384
Displays:
Color LCD:
Resolution: 1280 x 800
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No Display Connected

Try going through the game problem faq. That sounds like you have a bad pattern.

Does it do this when you are in build mode, as well?