Hi there! You are currently browsing as a guest. Why not create an account? Then you get less ads, can thank creators, post feedback, keep a list of your favourites, and more!
The ModFather
retired moderator
Original Poster
#1 Old 25th Nov 2005 at 11:49 PM Last edited by leefish : 17th Jan 2014 at 7:46 PM.
Partitions: walls, fences, fence arches
THE "PARTITIONS": WALLS, FENCES, FENCE ARCHES


DISCLAIMERThis is NOT a tutorial; it is intended to help average-experienced object creators performing specific tasks, or to give users a deeper in-sight on specific modding-related subjects. So, don't expect to find step-by-step explanations, to be performed "blindly". Please DO NOT REPOST the following info, or part of them, on other sites.

CREDITS: Some of the following information can be found scattered on the various forums, but special credits go to Kopperman for having collected and organized them, and for having provided a lot of additional info, by experimenting on the various partitions. Kopperman will mantain this thread, adding new information as he gathers them; and will answer to questions about the subject of this article.

-------------------------------------------------------------------------------------

SUMMARY
This article will try and give a detailed in-sight on the various parameters that affects the behaviour and exterior look of the "Partitions", i.e. those build elements that can be creating using the "Wall tool": walls, fences and fence-arches.

This InfoCenter article is also provided in PDF format. To view it, we strongly suggest to download the Foxisoft PFD Viewer: it's free and small, less than 1Mb!

-------------------------------------------------------------------------------------




PART 1 - AN INTRODUCTION TO PARTITIONS

The Partitions are defined in several text files, located into [gamedir]\EA Games\The Sims 2\TSData\Res\Catalog\Scripts. Actually, each EP has its own "script" folder, that contains the same text files; all these text files are read when the game starts, though, so far, only the files in the base-game folder actually contain partitions definitions.

These files are:
  • Walls.txt, that defines walls, including poolwalls, deckskirts, foundation walls and the like.
  • Fence.txt. that defines fences (but read important note below)
  • FenceArch.txt, that thefines the "Fence-Arches": there is only one in the game (the "Linking Logs Trellis Archway"), that is like a fence, and can be built like a fence, but looks like an arch and the sims can pass under it.
NOTE: unlike the walls and the fence-arches, the fences are actually treated by the game as objects: they are defined by a bunch of "Fence XML" files included in the "catpatterns.bundle.package", which is located in the TSData\Res\Catalog\Patterns folder. Nevertheless, the "Fence.txt" does contain a fence definition (only one), that is supposed to be the default fall-back fence definition to be used by the game when it can't find the right fence definition.
NOTE: the "Half Walls" introduced with the Nightlife expansion are fences: they are defined by the "Fence XML" files contained in the Nighlife "catpatterns.bundle.package"

Partitions can be warped, stretched, squeezed, on the vertical axis. The only limits being that a partition can not be compressed to less then 4 clicks high. That makes the smallest floor height also 4 clicks or as some have come to measure one section of modular stairs.
Partitions considered walls (precisely, "load bearing partitions", i.e. partitions that can bear a floor/roof over them) can be built up to one square from the edge of your lot. Walls running parellel to to lot edge seem to be limited to two squares from the edge itself, but in reality it is limited due to the inner edge of the outer square. The outer edge of your lot can not be raised or lowered. it is locked in the position it is in. Fences, halfwalls, non-load bearing partitions can be built in this last square with the "moveobjects on" cheat. Later you will see that you can make a fence load bearing, and that you can still build the fence to the edge of the lot, but you will still be unable to actually place any floor tiles on the second floor or higher at the edge. So far, no workaround has been found to solve this problem.


Since the Fence.txt contains only one not-in-catalog default fence, and the FenceArch.txt contains only one arch definition, we will concentrate on the Walls.txt, that is the most interesting file. But never forget that the game consider all the named txt files as one (including the ones located in the EP game folders): this means, for instance, that the same ID number assigned to a wall cannot be assigned to a fence or a fence arch.



PART 2 - THE PARTITIONS DEFINED IN THE "WALLS.TXT"

Here is a list of parameters that can be adjusted from within the Walls.txt file, and the meaning of each of them.

CatalogTextResource. Don't play with this. It doesn't do anything but give you information when you click on the tool in the game.

Wall n. You have to assign a new number for each new wall, fence or fence arch you want to make. It must be unique, between 1 and 255. Remember all partitions in the game share the same number space, so you can't duplicate for a wall a number that is already being used for fences, or fence arches.
HINT: The wall #1 is the standard wall, the most used one. We know, by now, that the wall number must be unique within all the walls and fences (-arches); therefore, if you create a new custom fence with SimPE, and assign it GUID 1, it will override the standard wall: in other words, you'll be able to replace the standard wall with a custom one. Use with caution, though! And remember that a lot created using such a fence (and the fence itself) cannot be shared with other users.

DefaultPattern. This is the name of the wall treatment that you want to be placed on your partition when it is first created. It must be a name found in the wallPatterns.txt, not in the material base. If you are comfortable with SimPE, then you can look up the the material base and create your own entry in the wallpattern.txt; and then use your custom wall patterns as the default wall treatment for your custom wall.

WallThickness. Accepted values are either "standard" (what the regular wall looks like) or "none". Please note that "none" doesn't really mean that the wall has no thickness at all; it is rather the thickness of glass, or of the lattice around the deck. Use in conjunction with blocksLight false (see below) and you can get interesting screen-like effects.
NOTE: After building a wall that has thickness none, applying (in game) a different wallpaper will make the wall lose the transparency.

MayChangeSurface. True or False. A no brainer here: if true you can recolor with the wall treatment tool, if false you can't.

MayAttachObjects. True or False. Seemingly a no brainer, but actually it doesn't work to let you attach objects to non-wall partitions. This parameter seems to have only one purpose, to let the user attach wall-mounted objects, windows and doors to foundation walls. In any case, you can not attach objects to the wall if the game feels you shouldn't for some reason. Thus if you want to attach objects to the foundation wall, the best solution is to use the "moveObjects on" cheat. But for windows and doors the situation is different, because windows and doors will not cut the proper hole in your wall if the moveObjects cheat is used to force the door or window there. Therefore, if you are planning to use windows and doors on foundation walls, you need to change the "MayAttachObjects" parameter to "true".
HINT: Even if you turn this option to "true" for foundation walls, you will still be unable to attach doors and window as long as you have foundation flooring. So remove this and you will be able to use the exposed portions of your foundation just like any other wall. Deleting a portion of the foundation wall and adding a normal wall won't help. It is the fact that the game considers anything under foundation flooring to be underground and thus unable to have windows and doors. Removing the flooring is the best, and really only option.

MayCutAway. True or False. If set to "true", the wall will be cut away to let you see inside (you need to set the game view to "walls down" or "auto", for the cutting away to work, obviously).

RequiresFlatBottom. True or False. Very useful option. When set to "true", walls tend to level the ground they are being placed on. Set to false and you now have easy walls that conform to your terrain.

RequiresFlatTop. True or False. Usually your tops are flat anyway. But in the case of wanting to build new walls under various curved roofs made using the ConstrainFloorElevation cheat, then you will need to have this set to false.
NOTE: Setting to true the RequiresFlatBottom and/or the RequiresFlatTop lets you create fairly interesting slanted walls, very useful in conjunction with advanced building tecniques. But please be sure to read the last note in Part 4 (sharing lots containing custom walls)
NOTE: Using doors and windows on slanted walls is always affected by a known issue: the "wallmask" (i.e. the "hole" cut by the window in the wall) gets slanted, too, while the window is not; as a consequence, the hole won't align any more to the window.

Submersible. True or False. Wether you can place the wall in water. Not just for pools: have this true so you can build little castles under your lakes.

mayPlaceDiagonally. True or False. Default is true. Lets you place diagonally as well as straight. A side note on diagonals here. You may have noticed in your game that you get an error now and again saying can't build diagonally. This is because partitions can not intersect each other except on the grid square corners. Because of the way grids are layed out, it is possible that two diagonals will not meet up at the corners and thus you won't be able to place the partition there. You will just have to make small adjustments in your plans. Nothing can be done about this. Second side note, for those that plan everything out before hand. Diagonal partition sections are approximately 1.4 times as long as the straight sections.

VerticalSpan. Accepted values are: "floorToFloor", "floorToRoof", "fixedHeight", "floorToFloorBasedCeiling".
FloorToFloor is the default and what you see most the time.
FloorToRoof is what is used when making dormers and adding roofs with the roof tool: it isn't very useful for the roofs made using the ConstrainFloorElevation cheat.
FloorToFloorBasedCeiling. This makes the wall end flush with the underside of the floor above it as opposed to flush with the top of the floor above it. Use it to keep strange lines from appearing in your beautiful roofs due to the walls below it, especially with CFE-made roofs.
FixedHeight. I played with this for a long time and it really isn't an option except for Maxis fences. The fixedHeight just doesn't have any parameters itself and can not be used to make various halfwalls 1\4 walls, etc. Maybe one day, when we learn to create new partition meshes, it will be more useful. It also will not change the height of fences. Nor can you expect a fence of fixed height made to be load bearing to have a floor at the fixed height. The floor will be the default 16 clicks high. You will have to lower it yourself.

BlocksPlacement. True or False. It doesn't actually block placement so much as determines whether it affects placement of objects on the same level as the partition. If false then you can place objects where you please even in the middle of the partition. If true then the partition is taken into account on where you can place the item. Some items will be allowed to be placed right up to the partition some may not be allowed within 2 squares. Yes a minor distinction between this and blocking the placement of objects, but an important distinction for those the use cheats heavily when building.

BearsLoad. True or False. Determines whether you can place something on the floor above it. Normally true for walls, false for fences. Some new interesting possibilites with fences may arise with allowing them to bear loads. A fence can be made to bear loads in the fence.txt by simply creating a new fence and then filling in the model info. You can then turn on or off whatever options you want for that fence type. A new fence type will be created in fence tools, it won't effect the maxis fence itself.

BlocksLight. True or False. Quite self-explanatory: when set to "false", the partition will allow the light to pass through. Use this in conjuntion with wallThickness and wallPattern to create interesting effects. Basically wallThickness none and blocksLight false gives you a transparency effect, wherever the wallPattern doesn't cover the wall.

HasLightMap. True or False. I can think of no good reason to turn off the light map for your wall. But this will do that. Lighting will no longer effect the way the wall looks.

NotRendered. This has no options. If you add it to your wall then the wall just will not be rendered. It won't be there visually. This means you can't attach things to it, nor can you change the surface treatment. It still will be there in all other ways, to include blocking placement, blocking sims from passing through it, casting shadow, blocking light, bearing loads. That is unless you change those options also...

DeleteTool. Accepted values: "Partition", "roof", "levelRoom", "modularStairs". You can only choose one, so don't go adding them all hoping that you can delete partitions with any tool you like. I have found it useful to change the deletion tool from "levelRoom" to "partition" under the foundation walls to allow easy basement modification. Makes for horrible foundation deletion though. You have to delete each wall individually if you make that modification.

RequiresSupportUnderneath. True or False. Sort of a funny option. Set it to "false" and you no longer get the error that it requires support underneath; nevertheless, if you do not have the squares letting you know that a floor would be supported there, it won't let you build. Still, set it to false and you don't have to add all those floor tiles before you can build a wall across the gaps.

ThumbnailResource. The Instance number (in hex) of the thumbnail associated to the wall type. The game store all the graphics, including the wall tool thumbnails, in the big "ui.package", located in the Res\UI folder. The graphics associated to your custom wall must be into the ui.package: this means that you can't create a custom icon for it (unless you edit the ui.package!).

CatalogTextIndex. The reference for the text to be used as description for the partition tool; all the text references are included in the Build.package, located in Res\Text.

BuildTipIndices. The reference for the text to be used as building tips; these tips are also included in the Build.package (instance 0x91).

NotInCatalog. Add this to you partition if you don't want it to show up in your tool catalog: useful, for instance, if you are just making a new pool wall, so you don't want the wall itself to show up in your catalog, just the pool tool.


PART 3 - SHARING CUSTOM WALLS

This is a very important point, because - as explained - creating a custom wall or editing an existing one requires modifying a game file, the walls.txt.
Sharing a custom wall is only useful if you want other users to use it to build their lots: if you are only planning to share a lot containing custom walls, then read part 4.
First of all, when sharing a custom wall, you must be sure to assign a unique wall number to it. To do so, check the Custom Wall Repository, in order to see which numbers are already taken; and then you should reply to the Repository in order to inform everyone of the numbers taken by you.
When you upload your custom wall, you have to give information about its installation: explain in the most detailed way as possible the steps required for the users to find and edit the walls.txt; don't forget to remind users to create a backup copy of the walls.txt before doing anything!


PART 4 - SHARING LOTS CONTAINING CUSTOM WALLS
You might think that when you share a lot containing custom walls, everyone that downloads your lot must edit its walls.txt in order for the lot to be correctly displayed. This, in most cases, is not true.
Many of the parameters listed in section 2 only affects the building phase, and are not used by the game to display the lot.
For instance, if you edit the "MayAttachObjects" and the "MayChangeSurface" in order to apply some sconces and a wallpaper to a basement wall, who downloads your lot will see the sconces and the wallpaper even with the original Maxis walls.txt.
Obviously, this method works only if you edit a wall already existing in the walls.txt: if you create a brand new wall, with its own custom wall number, downloaders need to edit the custom wall accordingly!
Therefore, when creating a lot that you want to share, if possible, create your "special effects" by editing a Maxis wall; only if this is not possible, then you should create a new wall.
When is it not possible to use this tecnique? When your "special effects" requires editing a parameter that is read by the game every time it displays the lot; for instance: wallThickness, mayCutAway, blocksLight, hasLightMap, notRendered. If your wall uses a custom settings for these parameters, you have no choice but to create a new wall, with its unique wall number, and share it with the lot.
In most of the other cases, you can just edit an existing Maxis wall, build your lot and share it, without asking the downloaders to do anything to their walls.txt file.
NOTE: in most cases, a lot built with the requiresFlatTop and the requiresFlatBottom doesn't need to create a custom wall: you can just edit the default wall in your own walls.txt. But in some cases, especially when the roof is bent using the ConstrainFloorElevation cheat, the wall underneath the roof may get flattened (thus creating a visible hole) when the lot is packaged and shared.
The same happens when the slanted wall has objects attached to it: the game engine needs to know where to place an item and so checks the wall and all the properties of the wall for proper placement. In doing so it might decide that the requiresFlatTop true in the users wall.txt should be honored and it flattens out the wall for you.
A good solution is to share the lot leaving the slanted walls free from objects and windows: doing so, the risk of flattened walls are reduced to minimum.


-------------------------------------------------------------------------------------

OTHER USEFUL RESOURCES

Modding InfoCenter Index - Comprehensive list of all the InfoCenter threads
Custom Wall Repository - If you are going to share your custom wall, check here for the numbers already taken by other users.




-------------------------------------------------------------------------------------
Attached files:
File Type: rar  PDF_InfoCenter_Partitions.rar (48.9 KB, 592 downloads) - View custom content

I've finally started my Journal. Information only, no questions.

My latest activity: CEP 9.2.0! - AnyGameStarter 2.1.1 (UPD) - Scriptorium v.2.2f - Photo & Plaques hide with walls - Magazine Rack (UPD) - Animated Windows Hack (UPD) - Custom Instrument Hack (UPD) - Drivable Cars Without Nightlife (UPD) - Courtesy Lights (FIX) - Custom Fence-Arches - Painting-TV - Smarter Lights (UPD)


I *DON'T* accept requests, sorry.
Advertisement
Mad Poster
#2 Old 11th Apr 2007 at 8:12 AM Last edited by niol : 24th Oct 2007 at 4:48 AM.
gozig86,

This's the attic wall script I use and this can be an example:


# attic walls
wall 3
defaultPattern "blank"
wallThickness standard
mayChangeSurface true
mayAttachObjects true
mayCutAway true
requiresFlatBottom false
requiresFlatTop false
submersible true
verticalSpan floorToRoof
#verticalSpan floorToFloor
deleteTools roof partition
requiresSupportUnderneath false
bearsLoad true
catalogTextIndex 6
#notInCatalog
thumbnailResource 0x499db772 0xe9261575



Related thread linkage for partition-products modding:

Partitions:
Modding InfoCenter - Partitions: walls, fences, fence arches
http://www.modthesims2.com/showthread.php?t=106473


Fences:

Is it possible to add bhavs & pie menu to a fence?
http://www.modthesims2.com/showthre...highlight=fence

New fence-need help!UPDATE 24/1 post#24
http://www.modthesims2.com/showthread.php?t=216472

Remeshed Fence
http://www.modthesims2.com/showthre...highlight=fence

What're the known links or references to correlate bhav, pie menus, OJBD, audio references, etc?
http://www.modthesims2.com/showthre...highlight=fence

Fences in lot package file:
http://www.modthesims2.com/showpost...6&postcount=513
http://www.modthesims2.com/showpost...6&postcount=517
http://www.modthesims2.com/showpost...6&postcount=532
http://www.modthesims2.com/showpost...1&postcount=466
http://www.modthesims2.com/showpost...5&postcount=534
Continuous/Contiguous No Vertical Post Fences?http://www.modthesims2.com/showthread.php?t=193824



Fencearches:
modding - Fence-arch: infos-sharing, ideas-mingling, etc...
http://www.modthesims2.com/showthre...light=fencearch
Test Subject
#3 Old 12th Apr 2007 at 12:06 PM
Quote: Originally posted by niol
gozig86,

This's the attic wall script I use and this can be an example:


# attic walls
wall 3
defaultPattern "blank"
wallThickness standard
mayChangeSurface true
mayAttachObjects true
mayCutAway true
requiresFlatBottom false
requiresFlatTop false
submersible true
verticalSpan floorToRoof
#verticalSpan floorToFloor
deleteTools roof partition
requiresSupportUnderneath false
bearsLoad true
catalogTextIndex 6
#notInCatalog
thumbnailResource 0x499db772 0xe9261575


ok so i change this in wall.txt ?
Mad Poster
#4 Old 12th Apr 2007 at 4:51 PM Last edited by niol : 12th Apr 2007 at 5:20 PM.
gozig86,

This's to show how to try to get the attic walls out for custom usages as you said in the other posts...

BTW, may check back my added questions in the SCRIPTORIUM thread... Thanks in advance.

Lab Assistant
#5 Old 14th Aug 2007 at 1:54 PM
your information was very good, im trying to do a mesh for a fence, I have treated the fence the same as an object.
in SimPE everything seems correct, even the preview buttons show that the mesh i created is successful, but the problem is, once i play the game, i comes up as a mesh and it is recoloured correctly but the height has not changed and other modiications i made to the fence do not appear, what could I be doing wrong?
The ModFather
retired moderator
Original Poster
#6 Old 16th Aug 2007 at 1:56 AM
Fences should be cloned using the procedure explained in this tutorial at SimPE site.

I'm not sure to understand what you mean that the new mesh appears in game, but "other modifications" that you made are missing...
Remember that fences are composed by three different meshes: straight, diagonal and post. You should clone a Maxis fence having the same height of the one you want to create (I don't remember well, but there is a parameter, somewhere, to tell the game the actual height of a fence: if you clone a Maxis fence and then modify the mesh giving it a different height, you might need to modify this parameter, too, otherwise the game will not know the new height of your fence...)

Perhaps Niol remembers better than me what is this parameter related to the fence height...

I've finally started my Journal. Information only, no questions.

My latest activity: CEP 9.2.0! - AnyGameStarter 2.1.1 (UPD) - Scriptorium v.2.2f - Photo & Plaques hide with walls - Magazine Rack (UPD) - Animated Windows Hack (UPD) - Custom Instrument Hack (UPD) - Drivable Cars Without Nightlife (UPD) - Courtesy Lights (FIX) - Custom Fence-Arches - Painting-TV - Smarter Lights (UPD)


I *DON'T* accept requests, sorry.
Lab Assistant
#7 Old 16th Aug 2007 at 7:49 AM
thanks anyway but I spent 2 hours last night and worked it out myself
Mad Poster
#8 Old 16th Aug 2007 at 8:34 AM
Sorry, no clue here either ...

Although there's a parameter @ fence xml file, still I've no idea on its use. And I've not fooled around with fence height at all . I 've not read anything about that either.

Sorry again. but, welcome to read the linkage @ post 2 of this thread.
Instructor
#9 Old 22nd Nov 2007 at 7:29 PM
Hey there. I've been poking around various forums and through the game files looking for this information, and I've been coming up empty. Is it possible to edit the data (specifically, the price) for the default game wall? Not the texture, but the mesh. I've learned it is GUID 0x00000001, but I can't find it or any of its associated data with SimPE.

I did notice that your custom walls are priced at $0, but I don't see anything in Walls.txt that seems to affect that...

Thanks for any help.
The ModFather
retired moderator
Original Poster
#10 Old 24th Nov 2007 at 1:49 AM
As far as I know, the price of the standard wall, along with its catalog description, is store in the Text List 0x81 of the Build.package, located in:
(GAME install dir)\The Sims 2\TSData\Res\Text

Each EP has its own Build.package, so you should edit the latest one.

I didn't realize that my custom walls had a price of 0: I've set a price of 70 in the text list contained in the package that comes with each custom wall...
Either you don't haveinstalled the package in the Scriptorium folder (perhaps you have put them in the Downloads?), or it just doesn't work this way...
However, it worth a try:
1) create a TXT file and paste in it the "Wall 1" section, as copied from the Walls.txt
1b) before saving, modify the "catalogTextResource" line using a unique name, for example: "catalogTextResource 01_GlobalMod_DefaultWall 129" (be sure to leave the "129" at the end of the line: it's the decimal form of the hexadecimal 0x81, i.e. the instance of the Text List containing description and price).
2) Save the file with the chosen unique custom name (e.g. "01_GlobalMod_DefaultWall.txt").
3) Copy one of the .package files that come with my custom walls and rename it exactly like the txt (e.g. "01_GlobalMod_DefaultWall.package")
4) edit the package content, modifying the description and the price at will; commit and save.
5) put BOTH the TXT and the package into the scriptorium folder and start the game: hopefully your mod will override the Maxis wall. I said "hopefully"... -

If this doesn't work, there is no choice but directly editing the Build.package: there is no way to force the game to load the wall description from the Downloads folder, so you have to edit the original game file... (keep a backup copy!!!)

I've finally started my Journal. Information only, no questions.

My latest activity: CEP 9.2.0! - AnyGameStarter 2.1.1 (UPD) - Scriptorium v.2.2f - Photo & Plaques hide with walls - Magazine Rack (UPD) - Animated Windows Hack (UPD) - Custom Instrument Hack (UPD) - Drivable Cars Without Nightlife (UPD) - Courtesy Lights (FIX) - Custom Fence-Arches - Painting-TV - Smarter Lights (UPD)


I *DON'T* accept requests, sorry.
Instructor
#11 Old 27th Nov 2007 at 9:47 PM
Heh, I guess I'm gonna have to break down and install the Scriptorium...I'm a stubborn cuss and a creature of habit and never saw any problem with editing text files, but it seems I'm now in danger of becoming a Sims 2 Luddite. XD Yeah, they're in my Downloads folder. I'll fix that in a bit.

Thanks much for the advice. I'll let you know if I can get it to work. :)

Quote: Originally posted by Numenor
As far as I know, the price of the standard wall, along with its catalog description, is store in the Text List 0x81 of the Build.package, located in:
(GAME install dir)\The Sims 2\TSData\Res\Text

Each EP has its own Build.package, so you should edit the latest one.

I didn't realize that my custom walls had a price of 0: I've set a price of 70 in the text list contained in the package that comes with each custom wall...
Either you don't haveinstalled the package in the Scriptorium folder (perhaps you have put them in the Downloads?), or it just doesn't work this way...
However, it worth a try:
1) create a TXT file and paste in it the "Wall 1" section, as copied from the Walls.txt
1b) before saving, modify the "catalogTextResource" line using a unique name, for example: "catalogTextResource 01_GlobalMod_DefaultWall 129" (be sure to leave the "129" at the end of the line: it's the decimal form of the hexadecimal 0x81, i.e. the instance of the Text List containing description and price).
2) Save the file with the chosen unique custom name (e.g. "01_GlobalMod_DefaultWall.txt").
3) Copy one of the .package files that come with my custom walls and rename it exactly like the txt (e.g. "01_GlobalMod_DefaultWall.package")
4) edit the package content, modifying the description and the price at will; commit and save.
5) put BOTH the TXT and the package into the scriptorium folder and start the game: hopefully your mod will override the Maxis wall. I said "hopefully"... :P -

If this doesn't work, there is no choice but directly editing the Build.package: there is no way to force the game to load the wall description from the Downloads folder, so you have to edit the original game file... (keep a backup copy!!!)
Instructor
#12 Old 28th Nov 2007 at 8:33 PM
Just wanted to note: the Scriptorium method doesn't seem to work (unless I'm doing it wrong, which is always a possibility,) but changing the Build.package data did the trick with no apparent ill effects. And I got your custom walls working properly too. Thanks again for the help!
Mad Poster
#13 Old 29th Nov 2007 at 9:51 AM
Actually, Scriptorium is not a way to change the price of wall-1 wall (the default wall), but just to provide a way to handle custom scripts efficiently including custom wall scripts.

But, now I learn editting that file can save my starter-house extra values... :D
Instructor
#14 Old 30th Nov 2007 at 5:35 PM
Quote: Originally posted by niol
Actually, Scriptorium is not a way to change the price of wall-1 wall (the default wall), but just to provide a way to handle custom scripts efficiently including custom wall scripts.

But, now I learn editting that file can save my starter-house extra values... :D


That's why I wanted to do it too. Put a decorative dummy wall on a house at the normal wall values and you can pretty much forget about using it as a starter home. XD
Lab Assistant
#15 Old 14th Jul 2008 at 6:34 AM
The SimPE fence tutorial is incorrect. Once I open the Object Workshop, I can't do anything with any of the entries other than select one and have its info appear in the "Selected Object" section underneath the list. There is no "export", "save", or whatever option for JUST that object--there is no right-mouse-click context menu. I hate unintuitive programs (and tutorials)...
Mad Poster
#16 Old 15th Jul 2008 at 8:39 AM
Quote: Originally posted by Eep
The SimPE fence tutorial is incorrect. Once I open the Object Workshop, I can't do anything with any of the entries other than select one and have its info appear in the "Selected Object" section underneath the list. There is no "export", "save", or whatever option for JUST that object--there is no right-mouse-click context menu. I hate unintuitive programs (and tutorials)...


May increase the screen resolution and let SimPE maximised.
coz sometimes, the buttons are "under cover".
Lab Assistant
#17 Old 16th Jul 2008 at 6:31 AM
I have a 1400x900 resolution screen and SimPE is fully maximized. Turns out I just had to click "Next" but that isn't very intuitive. Simply double-clicking the object should suffice, or a right-mouse-click context menu should appear with "Clone", "Recolor", etc. Also, an option to VIEW the object without having to extract (clone/recolor) it should be possible.

Also, SimPE is VERY slow--it's like using a Java app or something (yes, it's THAT slow). Screen refreshes lag and randomly refresh (especially when a pull-down menu is open).
Mad Poster
#18 Old 16th Jul 2008 at 7:05 AM
glad to hear you've figured it out.

may report your SimPE comments at the SimPE site. that way they may be more likely to hear your voice.
Test Subject
#19 Old 21st Jul 2008 at 3:17 PM
This is a great help! Thanks!

http://www.halocrusades.com?p=page&x=1734That is a fun new browser based RPG. Have a click!
Site Helper
#20 Old 24th Jul 2008 at 5:18 PM Last edited by Mootilda : 24th Jul 2008 at 7:14 PM. Reason: Add question about price of default walls.
Default Several new techniques and a question
Quote: Originally posted by AmberDiceless
Changing the Build.package data [to adjust the price of the default wall] did the trick with no apparent ill effects.
If I share a lot made with a lower-priced default wall, will the shared lot have the lower price? Or, does the other person have to make the corresponding change the build.package?

Quote: Originally posted by Numenor
Partitions can be warped, stretched, squeezed, on the vertical axis. The only limits being that a partition can not be compressed to less then 4 clicks high. That makes the smallest floor height also 4 clicks or as some have come to measure one section of modular stairs.
Here is a technique to create a partition which is less than 4 clicks:
http://www.modthesims2.com/showthread.php?t=190663

Quote: Originally posted by Numenor
Partitions considered walls (precisely, "load bearing partitions", i.e. partitions that can bear a floor/roof over them) can be built up to one square from the edge of your lot. Walls running parellel to to lot edge seem to be limited to two squares from the edge itself, but in reality it is limited due to the inner edge of the outer square. The outer edge of your lot can not be raised or lowered. it is locked in the position it is in. Fences, halfwalls, non-load bearing partitions can be built in this last square with the "moveobjects on" cheat. Later you will see that you can make a fence load bearing, and that you can still build the fence to the edge of the lot, but you will still be unable to actually place any floor tiles on the second floor or higher at the edge. So far, no workaround has been found to solve this problem.
There is now a workaround using the LotAdjuster:
http://www.modthesims2.com/showthread.php?t=282409

Walls which run along the edge of the lot are not safe, so the LotAdjuster will not allow you to create them. However, load-bearing walls which are perpendicular to the edge of the lot, or which are 1 tile from the edge, are safe and can be created.

Lot edges can also be changed using the LotAdjuster.
Mad Poster
#21 Old 25th Jul 2008 at 5:37 PM Last edited by niol : 26th Jul 2008 at 2:17 AM.
Just in case for those who happen not to know the development of some of these informations.

Quote: Originally posted by Numenor
that a partition can not be compressed to less then 4 clicks high.

that was based on the build tools as the community found out since they got their games.

Then as Mootilda mentioned the following technique in her post earlier, V1ND1CARE found out a way to make walls less than 4-click around July-August, 2006 (may check for the accuracy for the timing for those who happen to know).
http://www.modthesims2.com/showthread.php?t=190663

And as a lot-modding project started in this forum around September 2007, a lot-modding approach to archive the same goal, walls less than 4-click.
http://www.modthesims2.com/showthread.php?t=276870
Although I happened to write the grid point modding tutorial, but I was not the only one who knows how to do it at the time. :pint



Site Helper
#22 Old 25th Jul 2008 at 6:50 PM
Default Wall prices not stored in lot package
Quote: Originally posted by Mootilda
If I share a lot made with a lower-priced default wall, will the shared lot have the lower price? Or, does the other person have to make the corresponding change the build.package?
I finally had a chance to test this myself. It looks like the wall prices are not stored in the lot package, which means that anyone wanting to use this shared lot will need to make the change to build.package on their machine.
Doing all the things, and *mostly* not failing.
retired moderator
#23 Old 22nd Dec 2008 at 12:15 AM
If I wanted to make walls that looked and build exactly like the swimming pool walls, but don't fill with water, is this where I should start poking my nose in at? What tells the game to put pool water there?
The ModFather
retired moderator
Original Poster
#24 Old 26th Dec 2008 at 1:31 AM
The typical pool "hole" (vertical, adjacent to the surrounding terrain, that doesn't look slanted) always come with water, as far as I know. Even if we could visually get rid of the water, still the sims would "swim" in it, I guess.

I've finally started my Journal. Information only, no questions.

My latest activity: CEP 9.2.0! - AnyGameStarter 2.1.1 (UPD) - Scriptorium v.2.2f - Photo & Plaques hide with walls - Magazine Rack (UPD) - Animated Windows Hack (UPD) - Custom Instrument Hack (UPD) - Drivable Cars Without Nightlife (UPD) - Courtesy Lights (FIX) - Custom Fence-Arches - Painting-TV - Smarter Lights (UPD)


I *DON'T* accept requests, sorry.
Doing all the things, and *mostly* not failing.
retired moderator
#25 Old 26th Dec 2008 at 3:47 AM
Maybe not, I was able to put stairs down into a pool and the sim walked down all the stairs and then jumped back up to ground level. This was done only with move_objects.
Page 1 of 2
Back to top