|Search this Thread|
|25th Dec 2005, 08:58 PM||Need help (pagoda) I can't build walls inside #1|
Join Date: Dec 2005
I've built a pagoda and I can't build walls inside... Is anybody has a link to a tutorial or an idea to resolve that problem???
Sorry if my English is bad... :bandit:
|26th Dec 2005, 06:07 AM||#2|
Join Date: Jan 2005
If you're doing en7en's type of pagoda, then the inside wall is normally 4-click higher than the normal walls.
1. So, you have to enable the cheat box by pressing "Ctrl-shift-C" simultaneously and input "boolprop constrainfloorelevation false".
2. build your normal walls as usual (except to keep at least 2 grid rows away from the edges of the upper base of the level you're working on. Don't count the inclined roof as the edges. --> This's for re-levelling later, the next step.)
3. Go up a level and re-level the whole level from the edges to the edges of the level.
4. input "boolprop constrainfloorelevation true" and you're done.
visit Mikeinside's EAsy Wall Tutorial:
With that, you can just build the walls directly without any cheat provided that the upper grid base is not twisted too much to be obvious.
If you're building another type of pagodo, please attach a picture to show what your problem really is. Most people are no psychic capable of reading your mind...
|26th Dec 2005, 09:52 AM||#3|
You can download Numenors unlevel walls from HERE