Home | Help | Download | Community | Site Map | New Posts | Sign in
Replies: 3 (Who?), Viewed: 2494 times.
Test Subject
Original Poster
#1 Old 18th May 2011 at 9:34 PM
Default Extracting mesh from Sims3Pack?
Is there a way to extract meshes from Sims3Packs?
Advertisement
Alchemist
#2 Old 18th May 2011 at 9:37 PM
You can make it a .package and then extract using S3PE with this: http://www.modthesims.info/download.php?t=364038 or you could open it with TSRW and do it that way.

Hi I'm Paul!
Mad Poster
#3 Old 18th May 2011 at 10:13 PM
Like Robodl says, just keep in mind that if you want to create new stuff with the mesh you must use either one of them.
Recreating with TSRW: use TSRW to export the meshes
Recreating with CTU: use S3PE to export the meshes

Not sure if TSRW changed this already but they used a diffrent boneorder on the meshes in the past so you can not mix the 2 up
Test Subject
Original Poster
#4 Old 19th May 2011 at 4:17 PM
Thank you!
Back to top

Section jump